DTC Confirmation Procedure
WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
- PRECONDITIONING
- Pull the parking brake switch.NOTE: Check the parking brake switch indicator is turn On.
- Electric motor switch OFF.
- Get out of the vehicle and close all doors.
- Wait 65 seconds.
NOTE:- Check the parking brake switch indicator turn OFF.
- If the rear brake caliper is heated, wait an hour so that parking brake switch indicator does not turn OFF.
>>
GO TO 2.
- Pull the parking brake switch.
- DTC REPRODUCTION PROCEDURE
With M.U.T.-III SE
- Electric motor switch ON.
- Perform Diagnostic Trouble Code for "EPS/DAST 3".
Is DTC "C1630-87" detected?
YES >>
Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .
NO-1 >>
To check malfunction symptom before repair: Refer to Intermittent Incident INTERMITTENT INCIDENT .
NO-2 >>
Confirmation after repair: INSPECTION END