Work Procedure

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.

Always perform the side radar configuration after replacing the side radar.

SIDE RADAR CONFIGURATION
Perform the side radar configuration with M.U.T.-III SE. Refer to WORK PROCEDURE .

>>

GO TO 2.
SIDE RADAR ALIGNMENT
Perform the side radar alignment with M.U.T.-III SE. Refer to WORK PROCEDURE .

_>>

GO TO 3.
PERFORM DIAGNOSTIC TROUBLE CODE
Perform the Diagnostic Trouble Code of side radar with M.U.T.-III SE. Check if any DTC is detected.

Is any DTC detected?

YES >>

Perform the trouble diagnosis for the detected DTC.
- Side radar LH: Refer to DTC Index DTC INDEX .
- Side radar RH: Refer to DTC Index DTC INDEX .
NO >>

INSPECTION END