Work Procedure: Notes
WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
- Always adjust the camera aiming after removing and installing or replacing the front camera unit.
- Always adjust the camera aiming after removing and installing or replacing the windshield glass.
CAUTION:
- Place the vehicle on level ground when the camera aiming adjustment is operated.
- Be sure to place the target correctly according to work procedures because the system may not operate normally.
- Follow the M.U.T.-III SE when performing the camera aiming. (Camera aiming adjustment cannot be operated without M.U.T.-III SE.)