Configuration (IPDM E/R): Description
WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
Vehicle specification needs to be written with M.U.T.-III SE because it is not written after replacing the IPDM E/R.
The configuration requires network connection. M.U.T.-III SE connects to network and then it downloads the configuration data from the server. Then M.U.T.-III SE writes the vehicle specification to the IPDM E/R.
Refer to WORK PROCEDURE .
NOTE:
For details the network connection and operation, refer to "M.U.T.-III SE User's Manual".
The configuration no need to "save" configuration data from the IPDM E/R. The configuration data is always generated freshly at the server and then downloaded to the M.U.T.-III SE.
The configuration no need to "save" configuration data from the IPDM E/R. The configuration data is always generated freshly at the server and then downloaded to the M.U.T.-III SE.
CAUTION:
- Complete the procedure of "Configuration" in order.
- If incorrect "Configuration", incidents might occur.
- Never perform "Configuration" except for new IPDM E/R.