DTC Description: Notes
WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
- IPDM E/R operates the ignition relay when it receives an ignition ON signal from BCM via CAN communication.
- Turn the ignition relay OFF by pressing the electric motor switch once when the vehicle speed is 4 km/h (2.5 MPH) or less.
- Turn the ignition relay OFF with the following operation when the vehicle speed is more than 4 km/h (2.5 MPH) or when an abnormal condition occurs in CAN communication from the ABS actuator and electric unit (control unit) (Emergency OFF)
- Press and hold the electric motor switch for 2 seconds or more.
- Press the electric motor switch 3 times within 1.5 seconds.
NOTE:
The ignition relay does not turn ON for 3 seconds after emergency OFF even if the electric motor switch is pressed.