Component Function Check
WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
With M.U.T.-III SE
- Electric motor switch to ON.
- Select "HANDS FREE MODULE" using M.U.T.-III SE.
- Select "Push SW" in "Data List" mode.
- Check the electric motor switch signal under the following conditions.
Monitor item Condition Status Push SW Electric motor switch is pressed On Electric motor switch is not pressed Off Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Refer to DIAGNOSIS PROCEDURE .