Data List

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to M.U.T.-III SE display items.

Monitor item	Description
Compressor request 1 [ON/OFF]	NOTE: This item is displayed, but cannot be use this item.
Easy fill tire alert horn req [ON/OFF]	Displays the status of horn request signal (easy fill tire alert horn request) received from BCM via CAN communication.
Cranking enable-PHEV-ECU [No request/Stop/Permit/Prohibit]	Displays the status of cranking enable signal received from PHEV-ECU via CAN communication.
DTRL REQ [ON/OFF]	Displays the status of daytime running light request signal received from BCM via CAN communication.
COOLING FAN REQ [%]	Displays the status of cooling fan speed request signal received from PHEV-ECU via CAN communication.
FR WIPER REQ [NG/HIG H/LOW/Stop/Return]	Displays the status of front wiper request signal received from BCM via CAN communication.
HIGH BEAM REQ [ON/OFF]	Displays the status of high beam request signal received from BCM via CAN communication.
Horn request [NG/Return/Thft warn/Hrn chirp/Panic/OFF/No request]	Displays the status of horn request signal received from BCM via CAN communication.
Low beam request [ON/OFF]	Displays the status of low beam request signal received from BCM via CAN communication.
POSITION LIGHT REQ [ON/OFF]	Displays the status of position light request signal received from BCM via CAN communication.
IGNITION SW [Start/ON/No request/OFF]	Displays the status of ignition ON signal received from BCM via CAN communication.
FRONT FOG LIGHT REQ [ON/OFF]	Displays the status of front fog light request signal received from BCM via CAN communication.
Shift position [NG/M/D/N/R/P]	Displays the status of shift position signal received from TCM via CAN communication.
BATTERY VOLTAGE [V]	Displays the status of battery voltage value that IPDM E/R transmits via CAN communication.
FR WIPER STOP POSITION [Stop P/Active]	Displays the status of front wiper stop position signal that IPDM E/R transmits via CAN communication.
IGNITION POWER SUPPLY [ON/OFF]	Displays the supply status of ignition power supply that IPDM E/R transmits via CAN communication.
HOOD SW (CAN) [Closed/Open/NG]	Displays the status of hood switch signal that IPDM E/R transmits via CAN communication.
REVERSE SIGNAL (CAN) [NG/ON/OFF]	Displays the status of reverse position signal that IPDM E/R transmits via CAN communication.
Starter & starter cont relay stat [ON, ON/invalid/ON, OFF/OFF, OFF]	NOTE: This item is displayed, but cannot be use this item.
Hood switch [Close/Open]	Displays the status of hood switch judged by IPDM E/R.
IGN RELAY [Close/Open]	Displays the status of ignition relay judged by IPDM E/R.
Cooling fan relay-2 [ON/OFF]	Displays the cooling fan relay drive status judged by IPDM E/R.
Front wiper HI/LO relay [ON/OFF]	Displays the front wiper high relay drive status judged by IPDM E/R.
Horn relay [ON/OFF]	Displays the horn relay drive status judged by IPDM E/R.
Front wiper relay [ON/OFF]	Displays the front wiper relay drive status judged by IPDM E/R.
Battery current sen value (LIN) [A]	Displays the status of battery current value received from battery current sensor via LIN communication.
Headlight warning (LH) (LIN) [Close/Open]	Displays the status of low beam LH malfunction received from LED headlight control module LH via LIN communication.
Headlight warning (RH) (LIN) [Close/Open]	Displays the status of low beam RH malfunction received from LED headlight control module RH via LIN communication.
Cooling fan relay-3 [%]	Displays the cooling fan control module control signal output (PWM) status of IPDM E/R.
Front fog light (LH) [%]	Displays the front fog light LH power supply output (PWM) status of IPDM E/R.
Front fog light (RH) [%]	Displays the front fog light RH power supply output (PWM) status of IPDM E/R.
Tail light (LH) [%]	Displays the tail light LH power supply output (PWM) status of IPDM E/R.
Tail light (RH) [%]	Displays the tail light RH power supply output (PWM) status of IPDM E/R.
Headlight LO (RH) [%]	Displays the LED headlight control module RH control signal output (PWM) status of IPDM E/R.
Headlight LO (LH) [%]	Displays the LED headlight control module LH control signal output (PWM) status of IPDM E/R.
Parking light (LH) req (LIN) [Close/Open]	Displays the status of parking light LH ON/OFF control that IPDM E/R transmits via LIN communication.
DTRL (LH) req (LIN) [Close/Open]	Displays the status of daytime running light LH ON/OFF control that IPDM E/R transmits via LIN communication.
Headlight LO (LH) req (LIN) [Close/Open]	Displays the status of headlight LO (LH) ON/OFF control that IPDM E/R transmits via LIN communication.
Headlight HI (LH) req (LIN) [Close/Open]	Displays the status of headlight HI (LH) ON/OFF control that IPDM E/R transmits via LIN communication.
Parking light (RH) req (LIN) [Close/Open]	Displays the status of parking light RH ON/OFF control that IPDM E/R transmits via LIN communication.
DTRL (RH) req (LIN) [Close/Open]	Displays the status of daytime running light RH ON/OFF control that IPDM E/R transmits via LIN communication.
Parking/DTRL (LH) output (LIN) [%]	Displays the parking light/daytime running light LH control signal output (PWM) status that IPDM E/R transmits via LIN communication.
Parking/DTRL (RH) output (LIN) [%]	Displays the parking light/daytime running light RH control signal output (PWM) status that IPDM E/R transmits via LIN communication.
Headlight HI (RH) req (LIN) [Close/Open]	Displays the status of headlight HI (RH) ON/OFF control that IPDM E/R transmits via LIN communication.
Headlight LO (RH) req (LIN) [Close/Open]	Displays the status of headlight LO (RH) ON/OFF control that IPDM E/R transmits via LIN communication.
T LIGHT LH CIRC MALFUNCTN [-]	Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the tail light LH power supply circuit. NOTE: When the "NMB T LIGHT LH CIRC RETRY" count is 20, this item counts 1.
NMB T LIGHT LH CIRC RETRY [-]	Monitor the number of times that the smart FET in IPDM E/R permits the retry of the tail light LH power supply circuit. NOTE: When the "NMB T LIGHT LH CIRC SHORT" count is 5 and the electric motor switch OFF to ON operation is detected, this item counts 1.
Fr fog light (LH) circ malfunctn [-]	Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the front fog light LH power supply circuit. NOTE: When the "NMB F FOG LH CIRC RETRY" count is 20, this item counts 1.
T LIGHT RH CIRC MALFUNCTN [-]	Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the tail light RH power supply circuit. NOTE: When the "NMB T LIGHT RH CIRC RETRY" count is 20, this item counts 1.
NMB T LIGHT RH CIRC RETRY [-]	Monitor the number of times that the smart FET in IPDM E/R permits the retry of the tail light RH power supply circuit. NOTE: When the "NMB T LIGHT RH CIRC SHORT" count is 5 and the electric motor switch OFF to ON operation is detected, this item counts 1.
NMB T LIGHT RH CIRC SHORT [-]	Monitor the number of times that the smart FET in IPDM E/R detects the over current of the tail light RH power supply circuit.
NMB F FOG LH CIRC RETRY [-]	Monitor the number of times that the smart FET in IPDM E/R permits the retry of the front fog light LH power supply circuit. NOTE: When the "NMB F FOG LH CIRC SHORT" count is 5 and the electric motor switch OFF to ON operation is detected, this item counts 1.
NMB F FOG LH CIRC SHORT [-]	Monitor the number of times that the smart FET in IPDM E/R detects the over current of the front fog light LH power supply circuit.
F FOG RH CIRC MALFUNCTN [-]	Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the front fog light RH power supply circuit. NOTE: When the "NMB F FOG RH CIRC RETRY" count is 20, this item counts 1.
NMB F FOG RH CIRC RETRY [-]	Monitor the number of times that the smart FET in IPDM E/R permits the retry of the front fog light RH power supply circuit. NOTE: When the "NMB F FOG RH CIRC SHORT" count is 5 and the electric motor switch OFF to ON operation is detected, this item counts 1.
NMB F FOG RH CIRC SHORT [-]	Monitor the number of times that the smart FET in IPDM E/R detects the over current of the front fog light RH power supply circuit.
NMB T LIGHT LH CIRC SHORT [-]	Monitor the number of times that the smart FET in IPDM E/R detects the over current of the tail light LH power supply circuit.