Fail-Safe Control By DTC: Notes

WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.

IPDM E/R performs fail-safe control when any DTC are detected.

DTC No.	M.U.T.-III SE display		Fail-safe
B12A4-81	Battery current sensor	[INVALID SERIAL DATA RECEIVED]	Fix the power generation command value to 14.3 V.
B12A4-92	Battery current sensor	[PFM/INCORRECT OPERATN]	Fix the power generation command value to 14.3 V.
B20E2-96	LED HEADLIGHT RH	[CMPNENT INTERNAL MLFNCTN]	Transmits the headlight warning signal (CAN communication) to the combination meter. (When the electric motor switch turns ON, the headlight warning is displayed on the information display of the combination meter.) Transmits the request signal (via LIN communication) to the both side LED headlight control module, and turns ON the headlight (LO) and parking light.
B20E3-96	LED HEADLIGHT LH	[CMPNENT INTERNAL MLFNCTN]
U0073-00	Control module comm Bus A Off	[NO SUBTYPE INFO]	Refer to CAN COMMUNICATION CONTROL of following.
U2143-87	CAN comm err (PHEV-ECU)	[MISSING MESSAGE]
U214F-87	CAN comm err (BCM)	[MISSING MESSAGE]