LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2024 >> Outlander PHEV ES >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Airbag Control System (2 Of 5) >> DTC/Circuit Diagnosis >> DTC B0010-55: Assist A/B Module >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING:
  • Before servicing, electric motor switch OFF, disconnect 12V battery negative terminal, and wait at least 3 minutes or more. (To discharge backup capacitor.)
  • Never use unspecified tester or other measuring device.
  1. CHECK HARNESS CONNECTOR 

    Check the harness connector.

    Is the inspection result normal? 

    YES: GO TO  2

    NO: Replace harness connector.

  2. CHECK WIRING HARNESS 

    Check the wiring harness externals.

    Is the inspection result normal? 

    YES: GO TO  3

    NO: Replace wiring harness.

  3. PERFORM CONFIGURATION 
    1. Perform configuration for air bag diagnosis sensor unit. Refer to DESCRIPTION .
    2. Perform DTC confirmation procedure. Refer to DTC DESCRIPTION .

    Is DTC detected? 

    YES: GO TO  4

    NO: INSPECTION END

  4. REPLACE AIR BAG DIAGNOSIS SENSOR UNIT 
    1. Replace air bag diagnosis sensor unit. Refer to REMOVAL AND INSTALLATION .
    2. Perform DTC confirmation procedure. Refer to DTC DESCRIPTION .

    Is DTC detected? 

    YES: GO TO  1

    NO: INSPECTION END

scientia non olet · About LEMON Manuals