Basic Inspection: Configuration: Description
Vehicle specification needs to be written with M.U.T.-III SE because it is not written after replacing the power steering control module.
The configuration requires network connection. M.U.T.-III SE connects to network and then it downloads the configuration data from the server. Then M.U.T.-III SE writes the vehicle specification to the power steering control module.
Refer to WORK PROCEDURE .
NOTE:
For details the network connection and operation, refer to "M.U.T.-III SE Operation Manual".
NOTE:
The configuration no need to "save" configuration data from the power steering control module. The configuration data is always generated freshly at the server and then downloaded to the M.U.T.-III SE.
CAUTION:
- Complete the procedure of "Configuration" in order .
- If incorrect "Configuration", incidents might occur .
- Never perform "Configuration" except for new power steering control module .