LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2025 >> Eclipse Cross LE >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Keyless Entry System - (Vehicles Without Keyless Operation System) >> Symptom Procedures >> INSPECTION PROCEDURE 4: Multimode keyless entry system function does not work at all. <Vehicles with electric retractable remote controlled door mirrors (Up to 19 Model year) > >> Diagnosis
April 5, 2026: LEMON Manuals is launched! Read the announcement.

INSPECTION PROCEDURE 4: Multimode keyless entry system function does not work at all. <Vehicles with electric retractable remote controlled door mirrors (Up to 19 Model year) >: Diagnosis

  1. STEP 1. Confirm the transmitter  .

    Check that the keyless entry system works normally.

    Q: Is the check result normal? 

    YES:  Go to Step  2.

    NO:  Refer to trouble symptom chart (Refer to DTC B1A10 KEYLESS/F.A.S.T. KEY 1 LOW BATT.; DTC B1A11 KEYLESS/F.A.S.T. KEY 2 LOW BATT.; DTC B1A12 KEYLESS/F.A.S.T. KEY 3 LOW BATT.; DTC B1A13 KEYLESS/F.A.S.T. KEY 4 LOW BATT.; DTC B1A14 KEYLESS KEY 5 LOW BATTERY; DTC B1A15 KEYLESS KEY 6 LOW BATTERY; DTC B1A16 KEYLESS KEY 7 LOW BATTERY; DTC B1A17 KEYLESS KEY 8 LOW BATTERY  ).

  2. STEP 2. Check the operation of the electric-folding door mirror  .

    Check that the electric folding door mirrors work normally.

    Q: Is the check result normal? 

    YES:  Go to Step  3.

    NO:  Refer to Door mirror - TROUBLE SYMPTOM CHART .

  3. STEP 3. Using scan tool (M.U.T.-IIISE), read the DTC  .
    CAUTION: To prevent damage to scan tool (M.U.T.-IIISE), always turn the ignition switch to the OFF position before connecting or disconnecting scan tool (M.U.T.-IIISE).
    1. Connect scan tool (M.U.T.-IIISE). Refer to SPECIAL TOOLS .
    2. Check that keyless entry system sets a DTC.

    Q: Is the DTC set? 

    YES:  Refer to DTC CHART  .

    NO:  Go to Step  4.

  4. STEP 4. Check the customization function  .

    Use the customization function to check that the "Multi mode" has been set to one of the followings, not "Disabled."

    • D/M: O & C.

    Q: Is the check result normal? 

    YES:  Go to Step  5.

    NO:  Use the customization function to set the "Multi mode" to one of the above, not "Disabled" (Refer to MULTIMODE KEYLESS ENTRY FUNCTION CHECK <VEHICLES WITH ELECTRIC RETRACTABLE REMOTE CONTROLLED DOOR MIRRORS (UP TO 19 MODEL YEAR)>  ).

  5. STEP 5. Retest the system  .

    Check that the multimode keyless entry system works normally.

    Q: Is the check result normal? 

    YES:  The trouble can be an intermittent malfunction (Refer to How to use Troubleshooting/inspection Service Points - HOW TO COPE WITH INTERMITTENT MALFUNCTIONS ).

    NO:  Replace ETACS-ECU and register the ID codes (Refer to MULTIMODE KEYLESS ENTRY FUNCTION CHECK <VEHICLES WITH ELECTRIC RETRACTABLE REMOTE CONTROLLED DOOR MIRRORS (UP TO 19 MODEL YEAR)>  ).