 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
BSW TEMPORARILY NOT AVAILABLE |
Displayed when any of the conditions below is satisfied.
- Abnormal internal temperature in the ECU
- The sensors in the ECU are out of permissible temperature range
- The sensor in the ECU receives noise.
|
If the warning screen is not displayed normally or if the screen continues to be displayed, carry out the troubleshooting for the BSW. (Refer to DIAGNOSTIC TROUBLE CODE CHART <BSW-ECU (MASTER)>
<MASTER> or DIAGNOSTIC TROUBLE CODE CHART
<SLAVE>.) |
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
BSW SERVICE REQUIRED |
Displayed when the BSW-ECU fails due to open circuit in the sensor inside the BSW-ECU. |
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
BSW RADAR BLOCKED |
Displayed when the BSW cannot function due to a foreign material adhered on the sensor. |
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
- |
Displayed when an approaching vehicle is detected behind your vehicle during reversing. |
If the warning screen is not displayed normally or if the screen continues to be displayed, carry out the troubleshooting for the RCTA. (Refer to DIAGNOSTIC TROUBLE CODE CHART <BSW-ECU (MASTER)>
.) |