Component Function Check

1. Select "HOOD SW (CAN)" or "Hood switch" in "Data List" mode of "IPDM E/R" using scan tool (M.U.T.-III SE).
2. Check "HOOD SW (CAN)" or "Hood switch" indication under the following condition.

   Monitor item	Condition	Indication
   HOOD SW (CAN)	Close the hood	Close
   	Open the hood	Open
   	Transmits invalid CAN signal	NG
   Hood switch	Close the hood	Close
   	Open the hood	Open

Is the indication normal? 

YES: Hood switch is OK.

NO: Refer to DIAGNOSIS PROCEDURE .