Component Function Check

Check rear power window motor RH operation with power window main switch (rear RH switch) or rear power window switch RH.

Is the inspection result normal? 

YES: INSPECTION END

NO: Refer to DIAGNOSIS PROCEDURE .

Diagnosis Procedure 

1. Turn the power supply mode of the electric motor switch to OFF.
2. Disconnect rear power window motor RH connector.
3. Turn the power supply mode of the electric motor switch to ON.
4. Check voltage between rear power window motor RH harness connector and ground.

   (+)		(-)	Condition		Voltage
   Rear power window motor RH
   Connector	Terminal
   D305	1	Ground	Rear power window switch RH	UP	9 - 16 V
   				DOWN	0 - 1 V
   	2			UP	0 - 1 V
   				DOWN	9 - 16 V

Is the inspection result normal? 

YES: Replace rear power window motor RH. Refer to REMOVAL AND INSTALLATION .

NO: GO TO 2  .

1. Turn the power supply mode of the electric motor switch to OFF.
2. Disconnect rear power window switch RH connector.
3. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.

   Rear power window switch RH		Rear power window motor RH		Continuity
   Connector	Terminal	Connector	Terminal
   D304	1	D305	2	Existed
   	2		1

4. Check continuity between rear power window switch RH harness connector and ground.

   Rear power window switch RH		-	Continuity
   Connector	Terminal
   D304	1	Ground	Not existed
   	2

Is the inspection result normal? 

YES: INSPECTION END

NO: Repair or replace harness.