Component Function Check

Check rear power window motor RH operation with rear power window switch RH and power window main switch (rear RH switch).

Is the inspection result normal? 

YES: INSPECTION END

NO: Refer to DIAGNOSIS PROCEDURE .

Diagnosis Procedure 

1. Turn the power supply mode of the electric motor switch to OFF.
2. Disconnect power window main switch connector, rear power window switch RH and LH connector.
3. Check continuity between power window main switch harness connector and rear power window switch RH harness connector.

   Power window main switch		Rear power window switch RH		Continuity
   Connector	Terminal	Connector	Terminal
   D6	12	D304	3	Existed
   	16		4
   	11		5

4. Check continuity between rear power window switch RH harness connector and ground.

   Rear power window switch RH		-	Continuity
   Connector	Terminal
   D304	3	Ground	Not existed
   	4
   	5

Is the inspection result normal? 

YES: GO TO 2  .

NO: Repair or replace harness.

Check rear power window switch RH.

Refer to COMPONENT INSPECTION .

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace rear power window switch RH. Refer to REMOVAL AND INSTALLATION .