Component Function Check

Component Function Check

1. CHECK FUNCTION 

   Check rear power window motor LH operation with rear power window switch LH and power window main switch (rear LH switch).

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Refer to DIAGNOSIS PROCEDURE .

   Diagnosis Procedure

2. CHECK REAR POWER WINDOW SWITCH LH CIRCUIT 
   1. Turn the power supply mode of the electric motor switch to OFF.
   2. Disconnect power window main switch connector, rear power window switch LH and RH connector.
   3. Check continuity between power window main switch harness connector and rear power window switch LH harness connector.

      Power window main switch		Rear power window switch LH		Continuity
      Connector	Terminal	Connector	Terminal
      D6	12	D204	3	Existed
      	24		4
      	23		5

   4. Check continuity between rear power window switch LH harness connector and ground.

      Rear power window switch LH		-	Continuity
      Connector	Terminal
      D204	3	Ground	Not existed
      	4
      	5

   Is the inspection result normal? 

   YES: GO TO 2  .

   NO: Repair or replace harness.

3. CHECK REAR POWER WINDOW SWITCH LH 

   Check rear power window switch LH.

   Refer to COMPONENT INSPECTION .

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Replace rear power window switch LH. Refer to REMOVAL AND INSTALLATION .