LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 1983 >> Sentra Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Diesel >> Testing >> Injectors >> Nozzle Cleaning
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Nozzle Cleaning

  1. Disassemble injector nozzle. If nozzle needle is damaged, fused, seized or discolored, replace entire nozzle assembly. Check all other parts for excessive wear or damage. Replace as needed.
  2. Scrape off carbon deposits with a piece of wood and clean each part in cleaning solvent. After cleaning, keep parts emersed in light oil. Be sure to remove all deposits from adjusting shims, spring, push rod, spacer, nozzle body, needle and seat, and injection hole.
  3. Pull needle about halfway out of body and release. Needle should slide smoothly back into place. Repeat this procedure several times, rotating needle slightly each time. If needle does not slide smoothly, replace nozzle body and needle.
scientia non olet · About LEMON Manuals