LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 1987 >> Pulsar NX SE >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - Direct >> Testing >> Power Transistor Relay
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Transistor Relay

  1. Connect a 12-volt power source to terminals No. 1 and 2. See Fig 1. Using ohmmeter, check continuity between terminals No. 3 and 5. Continuity should exist.
  2. Disconnect the power source and recheck continuity. No continuity should exist. Check harness and connectors. If harness and connectors are okay, replace power transistor relay.
Fig 1: Power Transistor Relay Terminals
G62496
scientia non olet · About LEMON Manuals