LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 1993 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Ignition Switch >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Before proceeding, disarm SRS (if equipped). See DISABLING & ACTIVATING AIR BAG SYSTEM  . Disconnect battery ground cable. Remove upper and lower column covers. Disconnect wiring harness connector at ignition switch. Center punch 2 shear bolts and carefully drill heads off bolts. Remove shear bolts and ignition switch.
  2. Install new ignition switch. Ensure pin on ignition switch is aligned with hole in steering column. Install new shear bolts, and tighten loosely. Insert key and check for proper operation of ignition switch. If switch operates properly, tighten shear bolts until heads break off. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals