V6 Ignition Timing

Start engine and warm to normal operating temperature. Increase engine speed to 2000 RPM, 2 or 3 times, then allow engine to return to idle.
With engine correct idle RPM, check ignition timing. See V6 IGNITION TIMING table. See Fig 1. If ignition timing is incorrect, loosen hold-down bolt and turn distributor to adjust ignition timing.

Fig 1: Locating Ignition Timing Marks (V6)

Courtesy of NISSAN MOTOR CO., U.S.A.

V6 IGNITION TIMING (Degrees BTDC @ RPM)

Application

Man. Trans.

⁽¹⁾ Auto. Trans.

Pathfinder

13-17 @ 700-800

⁽¹⁾	Automatic transmission/transaxle in Neutral.