Consult UE951 Program Card Loading Instructions (NTB96-042)

WARNING: This page is about the Sentra E, 2D Sedan, Automatic, which is a different variant/trim than selected.

Publication date: 1996-05-01
Reference number: NTB96-042

CONSULT UE951 PROGRAM CARD LOADING INSTRUCTIONS

TECHNICAL SERVICE BULLETIN

Reference Number(s): NTB96-042, Date of Issue: May 1, 1996

CONSULT UE951 PROGRAM CARD LOADING INSTRUCTIONS

Model(s): Nissan Models

Classification: T & E96-006

Bulletin No.: NTB96-042

Date: May 1, 1996

NOTE: This is a Tool & Equipment Bulletin.

SERVICE INFORMATION

An update to the UE950 CONSULT Program Card is being released to dealers during the week of March 25, 1996. Special loading instructions for the new UE951 Program Card must be followed to ensure proper CONSULT operation. Both the UE950 and UE951 Program Cards are required to properly diagnose 1996 and selected 1997 vehicles.

Please follow the instructions to properly load the new UE951 Program Card. See Fig 1 thru Fig 3 .

FEATURES OF THE UE951 PROGRAM CARD

The UE951 Program Card has been introduced as a subcard for the UE950 Program Card. The UE951 Program Card contains revised engine, ABS, IVMS and new All mode 4WD diagnostic software. Use this card in combination with the UE950 card to update the above mentioned diagnostic software when loading CONSULT.

UE951 PROGRAM CARD UPDATE INFORMATION

The following table gives the update information contained in the UE951 Program Card.

UE951 PROGRAM CARD INFORMATION

Reference Section Page of the Consult Operation Manual	Updated Information
Introduction & Sub Mode - 10, 11	The operation for loading the program card has been updated.

Fig 1: Features UE951 Program Card

Fig 2: UE951 Program Card - Subcard Entry

Fig 3: UE951 Program Card - Initialization Using