Preliminary Checks
- Check fluid level using HOT range on dipstick with fluid temperatures of 122-176°F (50-80°C) after vehicle has been driven approximately 5 minutes after initial warm-up. COLD range on dipstick is for reference only.
- Fluid level should be checked with vehicle on level surface and parking brake applied. Check fluid level while engine is idling and selector lever is in "P" position.
- If fluid level is at low side of either range, add fluid. Check fluid condition. Check for fluid leakage. Examine fluid color, texture and odor. If fluid is Black and has a burnt odor, clutch friction plates are worn.
- If fluid is milky Pink in color, fluid is water-contaminated. Water may be entering transaxle through filler tube or breather. If fluid is Light/Dark Brown in color and tacky, fluid level is incorrect or transaxle is overheating.