Ignition Coil Power Source
WARNING: This page is about a different car, the 1996 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect ignition coil 2-pin connector. Turn ignition on. Check for voltage at specified wire terminal. See IGNITION COIL POWER SOURCE TERMINAL IDENTIFICATION table.
- If voltage is present, go to POWER TRANSISTOR. If voltage is not present, check continuity of entire circuit between battery and ignition coil, including fusible link and ignition switch.
IGNITION COIL POWER SOURCE TERMINAL IDENTIFICATION
| Application | Wire Color |
|---|---|
| 1.6L | Black/White |