Diagnostic Procedure

WARNING: This page is about a different car, the 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC
With CONSULT-II
1. Turn ignition switch "ON" and select "SELF DIAG RESULTS" mode for A/T with CONSULT-II.
2. Touch "ERASE".
  PERFORM DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE.
  
  See previous page.
Is the "CONTROL UNIT (RAM) or CONTROL UNIT (ROM)" displayed again?
1. Yes: Replace TCM.
2. No: INSPECTION END