LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R Spec V >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 98 (Engine Controls - System & Component Testing) >> Air Induction Systems >> Variable Induction Air System >> VIAS System & Component Testing (Murano)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VIAS System & Component Testing (Murano)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Nissan Xterra, 2003 Nissan Sentra, 2003 Nissan Pathfinder, 2003 Nissan Murano, and 2003 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

For VIAS system diagnostic procedure, see Fig 1-Fig 4 .

For engine control system component locations, see Figure-Figure . For ECM location, connector and terminal view, see Fig 5. To identify circuits referenced in testing, see ENGINE PERFORMANCE in SYSTEM WIRING DIAGRAMS article in ELECTRICAL.

For removal and installation of components, see appropriate REMOVAL & INSTALLATION article.

Fig 1: VIAS System & Component Testing Procedure (Murano - Step 1)
G00266964Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 2: VIAS System & Component Testing Procedure (Murano - Steps 2-4)
G00266965Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 3: VIAS System & Component Testing Procedure (Murano - Steps 5-8)
G00266966Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 4: VIAS System & Component Testing Procedure (Murano - Steps 9-10 & Component Inspection)
G00266967Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 5: Locating Engine Control Module & Connector Terminal Layout (Murano)
G00266963Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals