A/T PV IGN Relay
WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- Apply 12V direct current between A/T PV IGN relay terminals 1 and 2.
- Check continuity between relay terminals 3 and 5.
CONTINUITY CHART
| Condition |
Continuity |
| 12V direct current supply between terminals 1 and 2 |
Yes |
| OFF |
No |
- If NG, replace A/T PV IGN relay.
Courtesy of NISSAN MOTOR CO., U.S.A.