Freeze Frame Data and 1st Trip Freeze Frame Data
WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
FREEZE FRAME DATA AND 1ST TRIP FREEZE FRAME DATA REFERENCE
| Freeze frame data item |
Description |
| DIAG TROUBLE CODE [PXXXX] |
- The engine control component part/control system has a trouble code, that is displayed as PXXXX. (Refer to
"DTC INDEX ".)
|
| FUEL SYS-B1 |
- "Fuel injection system status" at the moment a malfunction is detected is displayed.
- One of in the following made is displayed.
Mode2: Open loop due to detected system malfunction
Mode3: Open loop due to driving conditions (power enrichment, deceleration enleanment)
Mode4: Closed loop - using oxygen sensor(s) as feedback for fuel control
Mode5: Open loop - has not yet satisfied condition to go to closed loop
|
| FUEL SYS-B2 |
| CAL/LD VALUE [%] |
- The calculated load value at the moment a malfunction is detected is displayed.
|
| COOLANT TEMP [°C] or [°F] |
- The engine coolant temperature at the moment a malfunction is detected is displayed.
|
| L-FUEL TRM-B1 [%] |
- "Long-term fuel trim" at the moment a malfunction is detected is displayed.
- The long-term fuel trim indicates much more gradual feedback compensation to the base fuel schedule than short-term fuel trim.
|
| L-FUEL TRM-B2 [%] |
| S-FUEL TRM-B1 [%] |
- "Short-term fuel trim" at the moment a malfunction is detected is displayed.
- The short-term fuel trim indicates dynamic or instantaneous feedback compensation to the base fuel schedule.
|
| S-FUEL TRM-B2 [%] |
| ENGINE SPEED [rpm] |
- The engine speed at the moment a malfunction is detected is displayed.
|
| VEHICL SPEED [km/h] or [mph] |
- The vehicle speed at the moment a malfunction is detected is displayed.
|
| ABSOL TH-P/S [%] |
- The throttle valve opening angle at the moment a malfunction is detected is displayed.
|
| B/FUEL SCHDL [msec] |
- The base fuel schedule at the moment a malfunction is detected is displayed.
|
| INT/A TEMP SE [°C] or [°F] |
- The intake air temperature at the moment a malfunction is detected is displayed.
|
| INT MANI PRES [kPa] |
- Always a certain value is displayed.
- These items are displayed but are not applicable to this model.
|
| COMBUST CONDITION |