LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis (Single Page) >> External Pages >> Different variant/trim >> Section 10 (Automatic Transaxle Re4F03B) >> On Board Diagnostic System Description >> OBD-II Diagnostic Trouble Code (DTC) >> How To Erase DTC (No Tools)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How To Erase DTC (No Tools)

WARNING: This page is about a different variant/trim than selected.
  1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 5 seconds and then turn it ON (engine stopped) again.
  2. Perform TCM Self-diagnostic Procedure (No Tools). Refer to TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS) . (The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)