LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Fuel System >> Idle Air Volume Learning >> Learning Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Learning Procedure

  1. Turn ignition switch on. Wait at least one second. Turn ignition switch off. Wait at least ten seconds.
  2. Start engine. Warm up to normal operating temperature. Turn ignition switch off. Wait at least ten seconds.
  3. Start engine and let idle for at least thirty seconds.
  4. Disconnect Throttle Position (TP) sensor harness connector (Brown), then reconnect it within five seconds. Wait twenty seconds.
  5. Ensure idle speed is within specifications. See THROTTLE POSITION SWITCH, IGNITION TIMING & IDLE SPEED in ON VEHICLE ADJUSTMENTS article. If idle is not as specified, result will be incomplete. See SYMPTOMS in TROUBLE SHOOTING - NO CODES article.
  6. Rev engine two or three times. Ensure idle speed and ignition timing are within specification. See ON VEHICLE ADJUSTMENTS article. If idle speed and timing are not as specified, see SYMPTOMS in TROUBLE SHOOTING - NO CODES article.
scientia non olet · About LEMON Manuals