Basic Operation

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition knob to LOCK position.
Connect CONSULT-II CONVERTER and CONSULT-II to data link connector.

Fig 1: Identifying Data Link Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Use mechanical key to turn ignition switch to ON.
Touch "START (NISSAN BASED VHCL)".

Fig 2: Displaying "START (NISSAN BASED VHCL)" Mode
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "INTELLIGENT KEY" on "SELECT SYSTEM" screen.
- If "INTELLIGENT KEY" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".
Fig 3: Displaying "INTELLIGENT KEY" Mode
Courtesy of NISSAN MOTOR CO., U.S.A.
Select diagnosis mode. "WORK SUPPORT", "SELF-DIAG RESULTS", "DATA MONITOR", "ACTIVE TEST" and "ECU PART NUMBER" are available.

Fig 4: Displaying "WORK SUPPORT" Mode
Courtesy of NISSAN MOTOR CO., U.S.A.