When Display Cover is Closed, Display is Stay On

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.

CHECK HARNESS
1. Turn ignition switch OFF.
2. Disconnect NAVI control unit connector and power cluster lid amp. connector.
3. Check continuity between NAVI control unit harness connector B104 terminal 22 (R/Y) and power cluster lid amp. harness connector M36 terminal 8 (R/W).
  - 22-8 : Continuity should exist.
OK or NG
- OK : GO TO 2.
- NG : Repair harness or connector.
Fig 1: NAVI Control Unit Harness Connector B104 Terminal 22 (R/Y) & Power Cluster Lid AMP Harness Connector M36 Terminal 8 (R/W) Continuity Test
Courtesy of NISSAN MOTOR CO., U.S.A.
CHECK POWER CLUSTER LID AMP.
1. Turn ignition switch OFF.
2. Replace power cluster lid amp.
Does the system operate normally?
- YES : INSPECTION END
- NO : Replace cluster lid D.