| GEAR |
|
|
|
Gear position judged by PNP switch signal is displayed. |
| FR RH SENSOR (km/h, MPH) |
|
|
|
Wheel speed calculated by front RH wheel sensor signal is displayed. |
| FR LH SENSOR (km/h, MPH) |
|
|
|
Wheel speed calculated by front LH wheel sensor signal is displayed. |
| RR RH SENSOR (km/h, MPH) |
|
|
|
Wheel speed calculated by rear RH wheel sensor signal is displayed. |
| RR LH SENSOR (km/h, MPH) |
|
|
|
Wheel speed calculated by rear LH wheel sensor signal is displayed. |
| BATTERY VOLT (V) |
|
|
|
Voltage supplied to ABS actuator and electric unit (control unit) is displayed. |
| N POSI SIG |
|
|
|
Shift position judged by PNP switch signal. |
| P POSI SIG |
|
|
|
Shift position judged by PNP switch signal. |
| ACCEL POS SIG (%) |
|
|
|
Throttle valve open/close status judged by CAN communication signal is displayed. |
| ENGINE SPEED (rpm) |
|
|
|
Engine speed judged by CAN communication signal is displayed. |
| STR ANGLE SIG (deg) |
|
|
|
Steering angle detected by steering angle sensor is displayed. |
| YAW RATE SEN (d/s) |
|
|
|
Yaw rate detected by yaw rate sensor is displayed. |
| DECEL G SEN (d/s) |
|
|
|
Longitudinal acceleration detected by decel G-sensor is displayed. |
| SIDE G-SENSOR (m/s2
) |
|
|
|
Transverse acceleration detected by side G-sensor is displayed. |
| STOP LAMP SW (ON/OFF) |
|
|
|
Stop lamp switch (ON/OFF) status is displayed. |
| OFF SW (ON/OFF) |
|
|
|
VDC OFF switch (ON/OFF) status is displayed. |
| HDC SW (ON/OFF) |
|
|
|
HDC switch (ON/OFF) status is displayed. |
| ABS WARN LAMP (ON/OFF) |
|
|
|
ABS warning lamp (ON/OFF) status is displayed. |
| SLIP LAMP (ON/OFF) |
|
|
|
SLIP indicator lamp (ON/OFF) status is displayed. |
| FR LH IN SOL (ON/OFF) |
|
|
|
Front LH IN ABS solenoid (ON/OFF) status is displayed. |
| FR LH OUT SOL (ON/OFF) |
|
|
|
Front LH OUT ABS solenoid (ON/OFF) status is displayed. |
| RR RH IN SOL (ON/OFF) |
|
|
|
Rear RH IN ABS solenoid (ON/OFF) status is displayed. |
| RR RH OUT SOL (ON/OFF) |
|
|
|
Rear RH OUT ABS solenoid (ON/OFF) status is displayed. |
| FR RH IN SOL (ON/OFF) |
|
|
|
Front RH IN ABS solenoid (ON/OFF) status is displayed. |
| FR RH OUT SOL (ON/OFF) |
|
|
|
Front RH OUT ABS solenoid (ON/OFF) status is displayed. |
| RR LH IN SOL (ON/OFF) |
|
|
|
Rear LH IN ABS solenoid (ON/OFF) status is displayed. |
| RR LH OUT SOL (ON/OFF) |
|
|
|
Rear LH OUT ABS solenoid (ON/OFF) status is displayed. |
| OFF LAMP (ON/OFF) |
|
|
|
OFF Lamp (ON/OFF) status is displayed. |
| MOTOR RELAY (ON/OFF) |
|
|
|
ABS motor relay signal (ON/OFF) status is displayed. |
| ACTUATOR RLY (ON/OFF) |
|
|
|
ABS actuator relay signal (ON/OFF) status is displayed. |
| CV1 (ON/OFF) |
|
|
|
Front side switch-over solenoid valve (cut valve) (ON/OFF) status is displayed |
| CV2 (ON/OFF) |
|
|
|
Rear side switch-over solenoid valve (cut-valve) (ON/OFF) status is displayed. |
| SV1 (ON/OFF) |
|
|
|
Front side switch-over solenoid valve (suction valve) (ON/OFF) status is displayed. |
| SV2 (ON/OFF) |
|
|
|
Rear side switch-over solenoid valve (suction valve) (ON/OFF) status is displayed. |
| VDC FAIL SIG (ON/OFF) |
|
|
|
VDC fail signal (ON/OFF) status is displayed. |
| TCS FAIL SIG (ON/OFF) |
|
|
|
TCS fail signal (ON/OFF) status is displayed. |
| ABS FAIL SIG (ON/OFF) |
|
|
|
ABS fail signal (ON/OFF) status is displayed. |
| EBD FAIL SIG (ON/OFF) |
|
|
|
EBD fail signal (ON/OFF) status is displayed. |
| FLUID LEV SW (ON/OFF) |
|
|
|
Brake fluid level switch (ON/OFF) status is displayed. |
| EBD SIGNAL (ON/OFF) |
|
|
|
EBD operation (ON/OFF) status is displayed. |
| ABS SIGNAL (ON/OFF) |
|
|
|
ABS operation (ON/OFF) status is displayed. |
| TCS SIGNAL (ON/OFF) |
|
|
|
TCS operation (ON/OFF) status is displayed. |
| VDC SIGNAL (ON/OFF) |
|
|
|
VDC operation (ON/OFF) status is displayed. |
| HDC SIGNAL (ON/OFF) |
|
|
|
HDC operation (ON/OFF) status is displayed. |
| HSA SIGNAL (ON/OFF) |
|
|
|
HSA operation (ON/OFF) status is displayed. |
| STP LAMP ON RLY |
|
|
|
Stop lamp on relay signal status is displayed |
| EBD WARN LAMP |
|
|
|
Brake warning lamp (ON/OFF) status is displayed. |
| SLCT LVR POSI |
|
|
|
Shift position judged by PNP switch signal. |
| R POSI SIG |
|
|
|
Shift position judged by PNP switch signal. |
| 2WD/4WD |
|
|
|
It recognizes on software whether it is 2WD and whether it is in 4WD state. |
| PRESS SENSOR |
|
|
|
Brake pressure detected by pressure sensor is displayed. |
| PRESS SEN 2 |
|
|
|
Brake pressure detected by pressure sensor is displayed. |
| CRANKING SIG |
|
|
|
The input state of the key SW START position signal is displayed. |