LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1764 (Power Steering System (Sedan)) >> Steering Column >> Removal and Installation >> Removal Of Steering Column Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Of Steering Column Assembly

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set vehicle to the straight-ahead position.
  2. Remove driver air bag module. Refer to "DRIVER AIR BAG MODULE ".
  3. Remove steering wheel and steering column cover (upper and lower). Refer to "INSTRUMENT PANEL ASSEMBLY ".
  4. Remove steering column cover front lower and steering lock escutcheon. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  5. Remove instrument driver lower panel. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  6. Remove combination switch & spiral cable from steering column assembly. Refer to "SPIRAL CABLE ".
  7. Remove knee protector lower. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  8. Remove cluster lid A. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  9. Remove key interlock cable. Refer to "KEY INTERLOCK CABLE ".
  10. Disconnect each switch connectors installed to steering column assembly, and then disconnect harness from steering column assembly.
  11. Remove fixing bolt and nut of upper joint (upper side).
  12. Remove mounting bolts and nut of steering column assembly, then remove steering column assembly from vehicle.
scientia non olet · About LEMON Manuals