| Only setting change function cannot be set with display. |
1. PRELIMINARY CHECK |
| 2. CAN COMMUNICATION INSPECTION USING CONSULT-II (SELF-DIAGNOSIS) |
| 3. If the above systems are normal, check display system |
INTEGRATED DISPLAY SYSTEM
(without NAVI) |
| NAVIGATION SYSTEM
(with NAVI) |
| A part of seat system does not operate (both automatically and manually). |
1. SLIDING MOTOR CIRCUIT INSPECTION |
| 2. RECLINING MOTOR CIRCUIT INSPECTION |
| 3. LIFTING MOTOR (FRONT) CIRCUIT INSPECTION |
| 4. LIFTING MOTOR (REAR) CIRCUIT INSPECTION |
| 5. IF THE ABOVE SYSTEMS ARE NORMAL, REPLACE THE DRIVER SEAT CONTROL UNIT |
| A part of pedal adjust and door mirror does not operate (both automatically and manually). |
1. PEDAL ADJUSTING MOTOR CIRCUIT INSPECTION |
| 2. MIRROR MOTOR LH CIRCUIT CHECK |
| 3. MIRROR MOTOR RH CIRCUIT CHECK |
| 4. IF THE ABOVE SYSTEMS ARE NORMAL, REPLACE THE AUTOMATIC DRIVE POSITIONER CONTROL UNIT. |
| A part of seat system does not operate (only automatic operation). |
1. SLIDING SENSOR CIRCUIT INSPECTION |
| 2. RECLINING SENSOR CIRCUIT INSPECTION |
| 3. LIFTING SENSOR (FRONT) CIRCUIT INSPECTION |
| 4. LIFTING SENSOR (REAR) CIRCUIT INSPECTION |
| 5. IF THE ABOVE SYSTEMS ARE NORMAL, REPLACE THE DRIVER SEAT CONTROL UNIT |
| A part of door mirror system does not operate (only automatic operation). |
1. MIRROR SENSOR LH CIRCUIT CHECK |
| 2. MIRROR SENSOR RH CIRCUIT CHECK |
| 3. IF THE ABOVE SYSTEMS ARE NORMAL, REPLACE THE AUTOMATIC DRIVE POSITIONER CONTROL UNIT. |
| All of the automatic operations do not operate. |
1. A/T DEVICE (PARK POSITION SWITCH) CIRCUIT INSPECTION |
| 2. UART COMMUNICATION LINE CIRCUIT INSPECTION |
| 3. PEDAL ADJUSTING SENSOR CIRCUIT INSPECTION |
| 4. IF ALL THE ABOVE SYSTEMS ARE NORMAL, REPLACE THE AUTOMATIC DRIVE POSITIONER CONTROL UNIT. |
| A part of seat system does not operate (only manual operation). |
1. SLIDING SWITCH CIRCUIT INSPECTION |
| 2. RECLINING SWITCH CIRCUIT INSPECTION |
| 3. LIFTING SWITCH (FRONT) CIRCUIT INSPECTION |
| 4. LIFTING SWITCH (REAR) CIRCUIT INSPECTION |
| 5. IF THE ABOVE SYSTEMS ARE NORMAL, REPLACE THE DRIVER SEAT CONTROL UNIT |
| A part of pedal adjust and door mirror does not operate (only manual operation). |
1. PEDAL ADJUSTING SWITCH CIRCUIT INSPECTION |
| 2. DOOR MIRROR REMOTE CONTROL SWITCH (CHANGE OVER SWITCH) CIRCUIT INSPECTION |
| 3. DOOR MIRROR REMOTE CONTROL SWITCH (MIRROR SWITCH) SWITCHING CIRCUIT INSPECTION |
| 4. IF THE ABOVE SYSTEMS ARE NORMAL, REPLACE THE AUTOMATIC DRIVE POSITIONER CONTROL UNIT |
| Automatic drive positioner system does not operate (only memory switch operation). |
1. SEAT MEMORY SWITCH CIRCUIT INSPECTION |
| 2. IF THE ABOVE SYSTEMS ARE NORMAL, REPLACE THE DRIVER SEAT CONTROL UNIT |
| Seat memory indicator lamps 1 and 2 do not illuminate. |
1. SEAT MEMORY INDICATOR LAMP CIRCUIT INSPECTION |
| 2. IF ALL THE ABOVE SYSTEMS ARE NORMAL, REPLACE THE DRIVER SEAT CONTROL UNIT. |
The Entry/Exiting does not operate when door is opened and closed.
(The Entry/Exiting operates with key switch) |
1. FRONT DOOR SWITCH CIRCUIT INSPECTION |
| 2. If all the above systems are normal, replace the BCM. |
| Door mirror system does not operate (only manual operation). |
1. DOOR MIRROR REMOTE CONTROL SWITCH GROUND CIRCUIT INSPECTION |
| Door mirror system does not operate (only automatic operation). |
1. DOOR MIRROR SENSOR POWER SUPPLY AND GROUND CIRCUIT INSPECTION |
| Seat system does not operate (only manual operation). |
1. POWER SEAT SWITCH GROUND CIRCUIT INSPECTION |
| Reverse tilt mirrors do not operate. |
1. Door mirror remote control switch is not in L or R position. |
| 2. CAN COMMUNICATION INSPECTION USING CONSULT-II (SELF-DIAGNOSIS) |
| 3. DOOR MIRROR SENSOR POWER SUPPLY AND GROUND CIRCUIT INSPECTION |