Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Set key interlock cable to key cylinder and install holder.
Turn ignition key to lock position.
Set selector lever to "P" position.

Fig 1: Identifying Key Interlock Cable To Key Cylinder And Holder
Courtesy of NISSAN MOTOR CO., U.S.A.
Insert interlock rod into adjuster holder.
Install casing cap to bracket.
Move slider in order to secure adjuster holder to interlock rod.

Fig 2: Identifying Interlock Rod Into Adjuster Holder

Courtesy of NISSAN MOTOR CO., U.S.A.