4WD Model
WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Applied model | VQ40DE | ||
|---|---|---|---|
| C200 | M226 | ||
| Front | Propeller shaft model | 2F1310 | |
| Number of joints | 2 | ||
| Coupling method with front final drive | Flange type | ||
| Coupling method with transfer | Flange type | ||
| Shaft length (Spider to spider) | 696 mm (27.40 in) | ||
| Shaft outer diameter | 63.5 mm (2.50 in) | ||
| Journal axial play | 0.02 mm (0.0008 in) or less | ||
| Propeller shaft runout limit | 0.6 mm (0.024 in) or less | ||
| Propeller shaft joint flex effort | 1.96 N.m (0.20 kg-m, 17 in-lb) or less | ||
| Rear | Propeller shaft model | 2S1330-BJ100 (steel) | |
| Number of joints | 2 | ||
| Coupling method with rear final drive | Flange type | ||
| Coupling method with transmission | Sleeve type | ||
| Shaft length (Spider to spider) | 804.9 mm (31.69 in) | 774.9 mm (30.51 in) | |
| Shaft outer diameter | 76.2 mm (3.00 in) | ||
| Journal axial play | 0.02 mm (0.0008 in) or less | ||
| Propeller shaft runout limit | 0.6 mm (0.024 in) or less | ||
| Propeller shaft joint flex effort | 2.26 N.m (0.23 kg-m, 20 in-lb) or less | ||