Accelerator Pedal Released Position Learning
WARNING: This page is about a different car, the 2003 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
Accelerator pedal released position learning is an operation to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time accelerator pedal position sensor harness connector or ECM is disconnected.
- Make sure that accelerator pedal is fully released.
- Turn ignition switch ON and wait at least 2 seconds.
- Turn ignition switch OFF wait at least 10 seconds.
- Turn ignition switch ON and wait at least 2 seconds.
- Turn ignition switch OFF wait at least 10 seconds.