Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

CHECK HEADLAMP (HI) OPERATION
WITHOUT CONSULT-III
1. Start IPDM E/R auto active test. Refer to Diagnosis Description.
2. Check that the headlamp switches to the high beam.
  NOTE: HI/LO is repeated 1 second each when using the IPDM E/R auto active test.
CONSULT-III
1. Select "EXTERNAL LAMPS" of IPDM E/R active test item.
2. With the test item operating, check that the headlamp switches to high beam.
  HI : Headlamp switches to the high beam.
  
  OFF : Headlamp OFF
  
  Does the headlamp switch to high beam?
  
  YES: Headlamp (HI) circuit is normal.
  
  NO: Refer to "DIAGNOSIS PROCEDURE ".