LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2275 (Engine Control System - DTCS P1271 To P2138) >> DTC P2122, P2123: App Sensor >> CONSULT-II Reference Value in Data Monitor Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CONSULT-II Reference Value in Data Monitor Mode

WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values.

ON BOARD DIAGNOSTIC LOGIC

MONITOR ITEM CONDITION SPECIFICATION
ACCEL SEN 1
ACCEL SEN 2(1)
  • Ignition switch: ON (Engine stopped)
Accelerator pedal: Fully released 0.6 - 0.95V
Accelerator pedal: Fully depressed Less than 4.75V
CLSD THL POS
  • Ignition switch: ON (Engine stopped)
Accelerator pedal: Fully released ON
Accelerator pedal: Slightly depressed OFF
(1) Accelerator pedal position sensor 2 signal is converted by ECM internally. Thus, it differs from ECM terminal voltage.