CAN System

WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

Area to be repaired shall be soldered, and wrapped with a tape [be sure that fraying of twisted wire shall be within (110 mm 4.33 in)].

Fig 1: Locating Soldered Wire Wound With Tape
Courtesy of NISSAN MOTOR CO., U.S.A.
Do not make a bypass connection to repaired area. (If it is done, branch part will be removed and characteristics of twisted wire will be lost.)

Fig 2: Identifying Bypass Wire Connection
Courtesy of NISSAN MOTOR CO., U.S.A.