LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 717 (Rear Window Defogger) >> Rear Window Defogger >> CONSULT-II Function >> Consult-II Basic Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Consult-II Basic Operation Procedure

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect "CONSULT-II" and CONSULT-II CONVERTER to data link connector.
    Fig 1: Locating Data Link Connector
    G02340211Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch ON.
  4. Touch "START (NISSAN BASED VHCL)".
    Fig 2: CONSULT-II Display-Touch "START(NISSAN BASED VHCL)"
    G02340212Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "IVMS" on the "SELECT SYSTEM" screen.
    Fig 3: CONSULT-II Display-Touch "IVMS"
    G02340213Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Check the model specification, and touch either "WITH SUNROOF" or "WITHOUT SUNROOF" on the "SELECT SYSCOND" screen.
    Fig 4: CONSULT-II Display-Touch "SELECT SYSCOND"
    G02340214Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Touch "OK". If the selection is wrong, touch "CANCEL".
  8. Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.
scientia non olet · About LEMON Manuals