LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 733 (Power Door Lock System) >> Power Door Lock System >> CONSULT-II Function >> Consult-II Basic Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Consult-II Basic Operation Procedure

WARNING: This page is about a different car, the 2003 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the ignition switch OFF, connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector, and turn the ignition switch ON.
    Fig 1: Identifying Data Link Connector
    G02022279Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "START (NISSAN BASED VHCL)".
    Fig 2: Display Consult-II Basic Operation Procedure Sheet (1 Of 3)
    G02022280Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch "IVMS".

    If "IVMS" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".

    Fig 3: Display Consult- II Basic Operation Procedure Sheet (2 Of 3)
    G02022281Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Check the model specification, touch either "WITH SUNROOF" or "WITHOUT SUNROOF".
  5. Touch "OK". If the selection is wrong, touch "CANCEL".
    Fig 4: Display Consult-II Basic Operation Procedure Sheet (3 Of 3)
    G02022282Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.
scientia non olet · About LEMON Manuals