Symptom Chart
WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM CHART
| Symptom | Diagnoses / service procedure | Refer to | |
|---|---|---|---|
| Only setting change function cannot be set with display. | 1. Preliminary check | PRELIMINARY CHECK | |
| 2. CAN communication inspection using CONSULT-II (self-diagnosis) | CAN COMMUNICATION INSPECTION USING CONSULT-II (SELF-DIAGNOSIS) | ||
| 3. If the above system are normal, check display system | Interacted display system (with out NAVI) | INTEGRATED DISPLAY SYSTEM | |
| Navigation system (with NAVI) | NAVIGATION SYSTEM | ||
| A part of seat system does not operate (both automatically and manually). | 1. Sliding motor circuit check | SLIDING MOTOR CIRCUIT CHECK | |
| 2. Reclining motor circuit check | RECLINING MOTOR CIRCUIT CHECK | ||
| 3. Front lifting motor circuit check | FRONT LIFTING MOTOR CIRCUIT CHECK | ||
| 4. Rear lifting motor circuit check | REAR LIFTING MOTOR CIRCUIT CHECK | ||
| 5. If the above systems are normal, replace the driver seat control unit | COMPONENT PARTS AND HARNESS CONNECTOR LOCATION | ||
| A part of pedal adjust and door mirror does not operate (both automatically and manually). | 1. Pedal adjusting motor circuit check | PEDAL ADJUSTING MOTOR CIRCUIT CHECK | |
| 2. Mirror motor LH circuit check | MIRROR MOTOR LH CIRCUIT CHECK | ||
| 3. Mirror motor RH circuit check | MIRROR MOTOR RH CIRCUIT CHECK | ||
| 4. If the above systems are normal, replace the automatic drive positioner control unit. | COMPONENT PARTS AND HARNESS CONNECTOR LOCATION | ||
| A part of seat system does not operate (only automatic operation). | 1. Sliding sensor circuit check | SLIDING SENSOR CIRCUIT CHECK | |
| 2. Reclining sensor circuit check | RECLINING SENSOR CIRCUIT CHECK | ||
| 3. Front lifting sensor circuit check | FRONT LIFTING SENSOR CIRCUIT CHECK | ||
| 4. Rear lifting sensor circuit check | REAR LIFTING SENSOR CIRCUIT CHECK | ||
| 5. If the above systems are normal, replace the driver seat control unit | COMPONENT PARTS AND HARNESS CONNECTOR LOCATION | ||
| A part of door mirror system does not operate (only automatic operation). | 1. Mirror sensor LH circuit check | MIRROR SENSOR LH CIRCUIT CHECK | |
| 2. Mirror sensor RH circuit check | MIRROR SENSOR RH CIRCUIT CHECK | ||
| 3. If the above systems are normal, replace the automatic drive positioner control unit | COMPONENT PARTS AND HARNESS CONNECTOR LOCATION | ||
| All the automatic operations do not operate. | 1. Key switch and key lock solenoid circuit check | KEY SWITCH AND KEY LOCK SOLENOID CIRCUIT CHECK | |
| 2. Detention switch circuit check | DETENTION SWITCH CIRCUIT CHECK | ||
| 3. UART communication line circuit check | UART COMMUNICATION LINE CIRCUIT CHECK | ||
| 4. Pedal adjusting sensor circuit check | PEDAL ADJUSTING SENSOR CIRCUIT CHECK | ||
| 5. If all the above systems are normal, replace the automatic drive positioner control unit. | COMPONENT PARTS AND HARNESS CONNECTOR LOCATION | ||
| A part of seat system does not operate (only manual operation). | 1. Sliding switch circuit check | SLIDING SWITCH CIRCUIT CHECK | |
| 2. Reclining switch circuit check | RECLINING SWITCH CHECK | ||
| 3. Front lifting switch circuit check | FRONT LIFTING SWITCH CIRCUIT CHECK | ||
| 4. Rear lifting switch circuit check | REAR LIFTING SWITCH CIRCUIT CHECK | ||
| 5. If the above systems are normal, replace the driver seat control unit | COMPONENT PARTS AND HARNESS CONNECTOR LOCATION | ||
| A part of pedal adjust and door mirror does not operate (only manual operation). | 1. Pedal adjusting switch circuit check | PEDAL ADJUSTING SWITCH CIRCUIT CHECK | |
| 2. Door mirror remote control switch (change over switch) circuit check | DOOR MIRROR REMOTE CONTROL SWITCH (CHANGEOVER SWITCH) CIRCUIT CHECK | ||
| 3. Door mirror remote control switch (mirror switch) switching circuit check | DOOR MIRROR REMOTE CONTROL SWITCH (MIRROR SWITCH) CIRCUIT CHECK | ||
| 4. If the above systems are normal, replace the automatic drive positioner control unit | COMPONENT PARTS AND HARNESS CONNECTOR LOCATION | ||
| Only memory switch operation. | 1. Seat memory switch circuit check | SEAT MEMORY SWITCH CIRCUIT CHECK | |
| 2. If the above systems are normal, replace the driver seat control unit | COMPONENT PARTS AND HARNESS CONNECTOR LOCATION | ||
| Seat memory indicator lamps 1 and 2 do not illuminate. | 1. Seat memory indicator lamp circuit check | SEAT MEMORY INDICATOR LAMP CIRCUIT CHECK | |
| 2. If all the above systems are normal, replace the driver seat control unit. | COMPONENT PARTS AND HARNESS CONNECTOR LOCATION | ||
| The Entry/Exiting does not operated when door is opened and closed. (The Entry/Exiting operates with key switch) | 1. Front door switch circuit check | CHECK DOOR SWITCH | |
| 2. If all the above systems are normal, replace the BCM. | COMPONENT PARTS AND HARNESS CONNECTOR LOCATION | ||
| Only door mirror system does not operate (only manual operation). | Door mirror remote control switch ground circuit check | DOOR MIRROR REMOTE CONTROL SWITCH GROUND CIRCUIT CHECK | |
| Only door mirror system does not operated (only automatic operation). | Door mirror sensor power supply and ground circuit check | DOOR MIRROR SENSOR POWER SUPPLY AND GROUND CIRCUIT CHECK | |
| Only seat system does not operate (only manual operation). | Power seat switch ground circuit check | POWER SEAT SWITCH GROUND CIRCUIT CHECK | |
| Only number support does not operate. | Number support circuit check | LUMBER SUPPORT CIRCUIT CHECK | |