Fail-Safe Function
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
BCM includes fail-safe function to prevent malfunction of electrical components controlled by CAN communications if a malfunction in CAN communications occurs.
BCM uses CAN communications to stop output of electrical components it controls.
Until ignition switch is turned off, front wiper remains in same status as just before fail-safe control was initiated. (If wiper was in low speed operation just before fail-safe, it continues low speed operation until ignition switch is turned OFF.)
When fail-safe status is initiated, BCM remains in standby until normal signals are received.
When normal signals are received, fail-safe status is canceled.