Turn Signal Operation: Notes

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition switch is in the ON or START position, power is supplied

Through 10A fuse [No. 16, located in the fuse block (J/B)]
To BCM terminal 38, and
Through 10A fuse [No. 14, located in the fuse block (J/B)]
To combination meter terminal 30.

Ground is supplied

To BCM terminal 52 and
To combination meter terminal 32
Through grounds M57, M61 and M79.