Sliding Roof Switch Assembly: Removal

WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE MAP LIGHT ASSEMBLY
1. Using a clip remover, detach the 3 clips and remove the light.
2. Disconnect the map light connector.
Fig 1: Removing Map Light Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002