Throttle Control Motor
WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect electric throttle control actuator harness connector.
- Check resistance between terminals 5 and 6.
Resistance: Approximately 1 - 15 Ω [at 25°C (77°F)]
- If NG, replace electric throttle control actuator and go to next step. Refer to "EXPLODED VIEW ".
- Perform "THROTTLE VALVE CLOSED POSITION LEARNING ".
- Perform "IDLE AIR VOLUME LEARNING ".