Diagnostic Procedure

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC (With CONSULT-II)
1. Turn ignition switch "ON". (Do not start engine.)
2. Select "SELF DIAG RESULTS" mode for "A/T" with CONSULT-II.
3. Touch "ERASE".
4. Turn ignition switch "OFF" and wait at least 10 seconds.
5. Perform DTC confirmation procedure, DTC CONFIRMATION PROCEDURE .
Is the "TCM.ROM" displayed again?
1. Yes: Replace the transmission assembly. Refer to REMOVAL & INSTALLATION - TITAN article.
2. No: INSPECTION END
  
  Fig 1: CONSULT-II Display
  Courtesy of NISSAN MOTOR CO., U.S.A.