LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Transfer Case) >> Precautions >> Precautions For Transfer Assembly And Transfer Control Unit Replacement >> Method For Adjustment With 4WD Shift Switch At "2WD" >> Pattern A
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pattern A

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Stop vehicle and move A/T selector lever to "N" position with brake pedal depressed. (Stay for at least 2 seconds.)
  2. Turn 4WD shift switch to "4LO" position. (Stay for at least 2 seconds.)
  3. Turn ignition switch "OFF".
  4. Start engine.
  5. Erase self-diagnosis. Refer to HOW TO ERASE SELF-DIAGNOSTIC RESULTS (WITH CONSULT-II)  or ERASE SELF-DIAGNOSIS (WITHOUT CONSULT-II) .
  6. Check 4WD shift indicator lamp and 4LO indicator lamp again. Refer to CHECK 4WD SHIFT INDICATOR PATTERN .

    If 4WD shift indicator lamp and 4LO indicator lamp do not indicate proper pattern, install new transfer control unit and retry the above check.

scientia non olet · About LEMON Manuals