Power Door Lock Operation
WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
BCM receives a LOCK signal from remote keyless entry receiver. BCM locks all doors with input of LOCK signal from remote keyless entry receiver.
When an UNLOCK signal is sent from remote keyless entry receiver once, driver's door will be unlocked.
Then, if an UNLOCK signal is sent from remote keyless entry receiver again within 5 seconds, all other door will be unlocked.
NOTE:
Remote keyless entry receiver is received key fob signal from key fob.
Power door lock operation mode can be changed using DOOR LOCK-UNLOCK SET mode in WORK SUPPORT of POWER DOOR LOCK SYSTEM.
Refer to WORK SUPPORT .
Power door lock operation mode can be changed using DOOR LOCK-UNLOCK SET mode in WORK SUPPORT of POWER DOOR LOCK SYSTEM.
Refer to WORK SUPPORT .